Automotive Window Film

Window Tinting Gold Coast

Ceramic and carbon films installed at our Arundel studio to Queensland legal limits, backed by a lifetime warranty and the same standards we apply to every vehicle we protect.

15+

Years Experience

7k+

Vehicles Coated

150+

Google Reviews

30+

Loan Cars

15+

Years Experience

7k+

Vehicles Coated

150+

Google Reviews

30+

Loan Cars

Why Tint

Benefits of Window Tinting on the Gold Coast

Few places in the country punish an untinted cabin quite like South East Queensland. Long summers, high UV and reflected glare off the water all take a toll on the interior and on the people sitting in it.

Quality film changes the way a car behaves in that environment. It cuts the heat load before it reaches the glass, takes the edge off glare on the M1 and along the coast road, and shields the dash, trim and seats from the UV that fades and cracks them over time.

It also pairs naturally with the rest of your protection. Many customers book window tinting Gold Coast alongside ceramic coating or new car protection so the vehicle is covered inside and out in a single visit.

Heat

A Cooler Cabin

Film rejects a large share of the solar energy hitting your glass, so the car heats up less while parked and the air conditioning works less on the road.

UV

Interior Protection

UV is what fades dashboards, cracks trim and dulls leather. Blocking it at the glass keeps the cabin looking closer to new for longer and supports resale value.

Glare

Safer Visibility

Low morning and afternoon sun off the water and wet road surfaces creates harsh glare. Tint reduces it without compromising the vision you need at night.

Privacy

Discretion And Security

Darker rear glass makes it harder to see what is inside a parked car, which is a practical deterrent at the beach car park or the shopping centre.

Comfort

Better For Passengers

Rear tint keeps direct sun off children, pets and anything you leave on the back seat, and makes long drives noticeably more comfortable in summer.

Finish

A Cleaner Look

Correctly matched film gives the glass a uniform, factory correct appearance, with no purpling, patchiness or visible edges around the seals.

The Films

Our Range of Tinting Films

We install two grades of film, both non metallic and both legal at the darkness levels Queensland allows. The right choice comes down to how much heat rejection you want and how you use the vehicle.

Carbon Film

Carbon film uses a carbon particle layer rather than dye or metal. It blocks UV, cuts glare and holds its colour, so it will not fade to the purple tone that gives cheap dyed film away after a couple of summers.

  • Stable Colour That Will Not Purple

  • Strong UV and Glare Reduction

  • No Signal Interference

  • Deep Matte Factory Finish

Best for: daily drivers wanting a substantial upgrade on factory glass at a sensible price point.

Ceramic Film

Ceramic film uses non conductive ceramic particles to reject far more infrared heat than carbon at the same legal darkness. The difference is felt, not just seen.

  • Highest Infrared Heat Rejection

  • Maximum UV Protection

  • No Signal Interference

  • Excellent Optical Clarity

Best for: prestige vehicles, family cars, and anyone who parks outdoors in full Queensland sun.

Neither film contains metal, so neither interferes with phone reception, GPS, keyless entry or radio. If you are unsure which grade suits your vehicle, our consultation includes an honest recommendation with no pressure to take the more expensive option.

Stay Compliant

QLD Tinting Laws and Regulations

Queensland sets its tint limits through the Department of Transport and Main Roads, and they are measured in VLT, or visible light transmission. A lower number means a darker film.

The point that catches most people out is that the limit applies to the combined result of your factory glass and the film over it, not the film alone. Most factory glass already sits around 70 to 75% VLT, so a film rated at the legal minimum can push the combined reading under it. We measure your glass before recommending a film, so your vehicle leaves compliant.

Queensland Limits For Standard Passenger Vehicles
WindowLegal LimitWhat It Means
WindscreenNo tintNo film across the main viewing area. A tint band is allowed across the top 10% of the windscreen, or above the wiper sweep, whichever is lower.
Front Side Windows35% VLT minimumThe combined VLT of the glass and film must not drop below 35%. This is the strictest limit on the vehicle.
Rear Side Windows20% VLT minimumDarker film is permitted behind the driver, provided the vehicle has working external mirrors on both sides.
Rear Windscreen20% VLT minimumSame allowance as the rear side windows, subject to the same external mirror requirement.
Reflectance10% maximumHighly reflective or mirrored film is not permitted, because it creates glare for other road users.

Going darker than the limits risks an on the spot fine and a defect notice requiring the film to be removed before the vehicle can be driven, and it can complicate an insurance claim after an accident. Different rules apply to some goods carrying vehicles such as vans and utes, so ask us about your specific vehicle. These limits are current at the time of writing and are provided as a guide only. For the definitive requirements, check with the Queensland Department of Transport and Main Roads.

Step By Step

Our Installation Process

A tint job is only as good as its preparation. Contamination trapped under film shows up as specks and bubbles that never go away, so every window tinting Gold Coast install follows the same disciplined sequence in a controlled, enclosed workshop.

Step 01

Consultation And Measurement

We discuss how you use the vehicle, then measure the factory glass with a light meter so the film we select keeps the combined VLT inside the legal limit.

Step 02

Deep Clean And Decontamination

Glass is stripped of grime, adhesive residue and bonded contamination. Any existing film is removed first, along with the old adhesive underneath it.

Step 03

Precision Cutting

Film is cut to your vehicle’s exact glass profile and heat shrunk to match the curvature, so it sits flush right to the edges with no gaps, lifting or light showing at the seals.

Step 04

Application

Each panel is applied in a controlled environment to keep airborne dust out from under the film, then squeegeed to remove moisture and lock the adhesive down evenly.

Step 05

Inspection

Every window is checked under specialist lighting for contamination, edge gaps and clarity before the vehicle is signed off and handed back.

Step 06

Curing And Aftercare

We explain the curing period, when you can first wind the windows down, and which products to avoid when cleaning the film, so it keeps performing for the life of the vehicle.

Loan cars are available across all three studios, so you are not left waiting. Let us know when you book and we will have one ready.

Step By Step

Our Installation Process

A tint job is only as good as its preparation. Contamination trapped under film shows up as specks and bubbles that never go away, so every window tinting Gold Coast install follows the same disciplined sequence in a controlled, enclosed workshop.

Step 01

Consultation And Measurement

We discuss how you use the vehicle, then measure the factory glass with a light meter so the film we select keeps the combined VLT inside the legal limit.

Step 02

Deep Clean And Decontamination

Glass is stripped of grime, adhesive residue and bonded contamination. Any existing film is removed first, along with the old adhesive underneath it.

Step 03

Precision Cutting

Film is cut to your vehicle’s exact glass profile and heat shrunk to match the curvature, so it sits flush right to the edges with no gaps, lifting or light showing at the seals.

Step 04

Application

Each panel is applied in a controlled environment to keep airborne dust out from under the film, then squeegeed to remove moisture and lock the adhesive down evenly.

Step 05

Inspection

Every window is checked under specialist lighting for contamination, edge gaps and clarity before the vehicle is signed off and handed back.

Step 06

Curing And Aftercare

We explain the curing period, when you can first wind the windows down, and which products to avoid when cleaning the film, so it keeps performing for the life of the vehicle.

Loan cars are available across all three studios, so you are not left waiting. Let us know when you book and we will have one ready.

Backed For Life

Lifetime Warranty Information

Cheap film fails in predictable ways. It bubbles at the edges, turns purple, cracks along the demister lines, or peels away from the glass after a few summers. Our films are chosen specifically because they do not do that, and they are warranted accordingly.

Every tint we install carries a lifetime warranty on the film, and our workmanship is covered alongside it. If a covered fault appears, we make it right. No fine print gymnastics, no arguing over whose problem it is.

Bubbling and Blistering
Cracking and Crazing
Adhesive Failure
Peeling and Delamination
Discolouration and Fading
Installation Workmanship

The warranty is registered to your vehicle at the time of installation. Keep your invoice, and if anything ever looks wrong, call us on 1300 300 100 and bring the car in.

Lifetime

Warranty On Film And Workmanship

Accredited

GTechniq And Kovalent

We are accredited by both GTechniq and Kovalent, two of Australia’s most respected names in automotive surface protection, each offering 24/7 support.

Guaranteed

Satisfaction Guaranteed

If we identify a problem with our work, we fix it. No fuss, no fine print. We stand behind every job that leaves the workshop.

Google Reviews

What Our Customers Say

EXCELLENT
Google star 1Google star 2Google star 3Google star 4Google star 5
Based on 191 reviews
Posted on Google Google
James Oliver profile picture
James Oliver
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Andrew and the team at Car Ceramic Protection in Geebung were absolutely outstanding from start to finish. My new Prado had several paint defects and scratches that needed to be addressed under warranty, and Andrew went above and beyond to help me through the entire process. He provided detailed evidence, communicated clearly and helped me get the maximum possible contribution from Toyota toward the rectification work. The paint correction was exceptional, and the car came back looking better than new. Car Ceramic Protection also completed the ceramic coating, interior protection and window tint, and the quality of every part of the job was first-class. The finish is incredible, and their attention to detail is obvious. Andrew was honest, knowledgeable, extremely helpful and kept me informed throughout the entire process. It is rare to find someone who genuinely cares this much about both the customer and the final result. I couldn’t be happier with the service or the outcome and would highly recommend Andrew and Car Ceramic Protection to anyone wanting their vehicle properly protected and presented at its absolute best. Easily five stars.
Posted on Google Google
Rob Pfeffer profile picture
Rob Pfeffer
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Andrew & Tom and the team did a great job of the wrap on my 812. Always a pleasure to deal with this company as it is professional and personal at the same time.
Posted on Google Google
El Toro profile picture
El Toro
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Surface savants’
Posted on Google Google
Steve Harris profile picture
Steve Harris
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great team - went out of their way to make the whole experience simple & positive. And of course the car looks great.
Posted on Google Google
Furqan Aijaz profile picture
Furqan Aijaz
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I recently had my vehicle treated by Car Ceramic Protection in Geebung and was extremely impressed with the entire experience. The quality of the ceramic coating exceeded my expectations, leaving the paintwork with an amazing shine and a smooth, protected finish. A big thank you to Andrew for his exceptional service. He was friendly, professional, and clearly passionate about his work. Andrew took the time to explain the process, answered all my questions, and ensured the job was completed to the highest standard. His attention to detail and commitment to quality were evident from start to finish. I highly recommend Car Ceramic Protection to anyone looking for professional ceramic coating services in Geebung. Outstanding results, excellent customer service, and great value for money.
Posted on Google Google
Lisa Birmingham profile picture
Lisa Birmingham
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Andrew and his team did a fabulous job. Their attention to detail and customer service was exceptional. Would absolutely recommend and be back in the future.
Posted on Google Google
Rex Meadowcroft profile picture
Rex Meadowcroft
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great service and excellent result. The car now looks so shiny. The free top ups every twelve months is also an excellent addition.
Posted on Google Google
Robert Freebairn profile picture
Robert Freebairn
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Have just had the Cannon Ultra ute protected by Car Ceramic Protection. From initial contact to pick the car up once done the team at Car Ceramic were great. Information I was given by front office was on point and relevant. Highly reccomend them.
Posted on Google Google
Samten Wangdi profile picture
Samten Wangdi
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They have done an excellent job! My Prado looks amazing with their professional ceramic coating.
Posted on Google Google
Dee Dee (D) profile picture
Dee Dee (D)
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
A huge thanks to the team for looking after our new Range Rover Sport Autobiography with PPF, Ceramic Coating, Interior Protection and Window Tinting. Andrew also dealt directly with the dealership to achieve a positive resolve on a panel issue he found on our behalf. Andrew, Cassy and the team are amazingly professional and personable. I would highly recommend taking your vehicle here, whether it’s brand spanking new or older, for any exterior or interior protection or TLC. 💗

Book Today

Book Your Window Tint Today

Book your window tinting Gold Coast appointment at our Arundel studio. Tell us about your vehicle and how you use it, and we will recommend the right film and confirm a time. Consultations are free and there is no obligation.

Request a booking

We reply during business hours, Monday to Friday.

Arundel studio, Gold Coast

3/4 Telford Place, Arundel QLD 4214
Mon to Fri: 8:00am to 4:30pm
Saturday: By appointment
Sunday: Closed

Speak to the team

Phone: 1300 300 100
Andrew direct: 0447 755 730
Email: info@kosauto.com.au

Common Questions

Window Tinting Gold Coast FAQs

For most passenger vehicles, front side windows must stay at 35% VLT or lighter. Rear side windows and the rear windscreen can go down to 20% VLT, provided the vehicle has working external mirrors on both sides. No tint is permitted across the main viewing area of the windscreen, although a band across the top 10% is allowed.

Yes, and this is where a lot of DIY and budget jobs come unstuck. The limit applies to the combined VLT of the factory glass and any film applied over it. Most factory glass already sits around 70 to 75% VLT, so a 35% film over the top can push the combined reading under the limit. We measure your glass with a light meter before choosing a film.

Carbon film blocks UV, cuts glare and holds its colour without fading to purple, which is the common failure of cheap dyed film. Ceramic film uses non metallic ceramic particles that reject significantly more infrared heat at the same legal darkness. Neither contains metal, so neither interferes with phone, GPS or radio signals.

Yes. Our films carry a lifetime warranty covering bubbling, peeling, cracking, delamination and discolouration, and our installation workmanship is covered alongside it. The warranty is registered to your vehicle at the time of installation.

Yes. We have more than 30 loan cars across our Brisbane, Gold Coast and Melbourne studios, so your day keeps moving while we work on your vehicle. Mention it when you book and we will organise one.

Our Gold Coast studio is at 3/4 Telford Place, Arundel QLD 4214, open Monday to Friday from 8:00am to 4:30pm, with Saturdays by appointment. Call 1300 300 100 or view all of our locations.